Odometer: inverted expected values

Share RGraph:   Share or Like RGraph on Facebook!

« Back to message list

Enter your email address to get email updates on this topic. You can stop receiving updates by clicking the link in the update email messages.

Posted by Charly S. on 3rd July 2013
First thanks for your library it's great. I'm trying to use the odometer for a plant indicator and I find that some indicators are positive and other negative (that means: some are expected to be high, and other to be low). Your odometer seems to work only for "expected low" (the normal by the way).

For example productivity would be in green when at, say 97%. Is there a way to implement this with your components? Thanks again.
Posted by RGraph support on 3rd July 2013
Hi there,

Do you mean something like this:

www.rgraph.net/fiddle/view/6b60329de106a386b0f8e99ef4ca72e9

Bear in mind that it's using the Meter chart - not the Odometer.





Richard, RGraph Support
Posted by Charly S. on 3rd July 2013
Hi Richard! Yes that might be the appropiate tool. Will try again to see how it goes. Thanks!
Posted by Charly S. on 3rd July 2013
Hi Richard! Fantastic. This seems be the appropiate tool. Thanks for the help.
Posted by RGraph support on 3rd July 2013
Hi there,

There may be a little issue with adjusting, if you use that, in conjunction with start/end angles bigger then the defaults (smaller should be fine) but that will be fixed in the next release.





Richard, RGraph Support

Add a reply




« Back to message list